{friday finds: exterior painting tips for fall weather}


Goldsmith Painting

Goldsmith Painting

Things to know when painting in cool weather

Rather than endure the sweltering summer heat, many people prefer to take on exterior painting projects in cooler, more temperate fall weather. However, crisp mornings and warm afternoons often give way to cool evenings and when the thermometer drops, painters must take heed of special precautions. If you’re considering applying a new exterior paint color to your home this fall Hirshfield’s expert, Mark Masica, says the best time to paint is typically between 10:00a.m. and 3:00p.m. He also has recommends these exterior painting tips for fall weather:

50-degrees

Masica says, for best results you should not apply paint or stains in temperatures below 50-degrees. Not following these guidelines can cut years off the life of the paint job, before cracking and loss of adhesion set in. However, Hirshfield’s Paint Manufacturing has a complete line of premium 100% acrylic latex paints and primers that have been specially formulated to be used in temperatures as low as 35°F. Keep in mind, in ideal situations, the air and surface temperatures should not drop below 35° for 36 hours after application to allow proper drying and film formation.

Start on the sunny side of the house

In the hot and humid summer months, it’s common practice for painters to begin painting on the shady side of a house and working around the home to avoid the glare of the sun. In the fall, it’s the exact opposite. When possible start painting on the sunny side of the house and follow the sun around your home.

Be patient

Keep in mind that lower temperatures mean slower drying and longer curing times, which means be patient. Allow ample time between coats, generally 24-hours. Masica adds, “this is especially critical when you’re painting with darker colors, which have more colorant, or when applying a latex paint over an alkyd primer.”

Pay attention to the dew points

Here’s a thumbnail meteorology lesson, the dew point is the temperature at which moisture will condense on a surface. So, what does this mean for you painters? Paints, stains, or primers should not be applied unless the surface temperature is at least 5° higher than the dew point. Remember that all surfaces to be stained or painted need to be clean and dry. If dew forms on a painted surface that hasn’t had a chance cure properly, you may experience some water spotting or surfactant leaching problems, especially in darker colors.

Since Frank and Elizabeth Hirshfield opened their first store in 1894, it has been our mission to do the best job possible meeting customer needs and solving customer problems. Hirshfield’s. People and products you can trust.

 

2 Responses to “{friday finds: exterior painting tips for fall weather}”

  1. {when to paint on brick] | Hirshfield's Color Club Says:

    […] wall can give a room or fireplace extra character, and can be the focal point of a home’s exterior. But what if you get tired of your brick, or never liked its color in the first place? There are […]

  2. {finding the right temperature to paint outside} | Hirshfield's Color Club Says:

    […] to stay on the safe side and avoid any unwanted speed bumps, Hirshfield’s expert Mark Masica suggests painting in no less than 50°F weather. Masica also recommends painting from 10a.m.-3p.m. to achieve maximum […]


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: